Exterior Wall EPS Insulation Board 20 mm Panel For Building Thermal Protection Works
Basic Properties
Trading Properties
| Product Type: | Standard EPS Board | Material: | Expanded Polystyrene Bead With Flame Retardant Additive |
|---|---|---|---|
| Model Grade: | EPS-STD/20 | Thermal Conductivity: | 0.037 W/(m.K) At 25 C |
| Density: | 15 - 22 Kg/m3 | Compressive Strength: | >= 60 KPa |
| Hydrophobicity: | >= 97% | Oxygen Index: | >= 30% |
| Fire Performance: | GB 8624 Class B1 / B2 | Dimensional Stability: | <= 2.0% At 70 C, 48 H |
| Service Temperature: | -50 To 75 C | Thickness: | 20 Mm |
| Standard Size: | L 600 / 900 / 1200 Mm, W 600 / 900 Mm | Application: | Exterior Wall Thermal Protection, ETICS Substrate, Renovation Cladding |
| Density: | 10-50 Kg/m³ | Recyclability: | Yes |
| Thermal Stability: | Up To 80°C | Moisture Resistance: | High |
| Material: | Expanded Polystyrene | Applications: | Insulation, Packaging, Construction |
| Weight: | Lightweight | Environmental Impact: | Low Embodied Energy, Non-biodegradable |
| Fire Resistance: | Class E (can Be Enhanced With Additives) | Size: | Customizable Sheets And Blocks |
| Color: | White | Compressive Strength: | 70-300 KPa |
| Thermal Conductivity: | 0.032-0.038 W/m·K | Chemical Resistance: | Resistant To Most Acids And Alkalis |
| Water Absorption: | Less Than 3% |
Exterior Wall EPS Insulation Board 20 mm Panel for Building Thermal Protection Works
Moulded standard EPS board for exterior wall thermal protection. The fused bead structure gives stable thermal performance, low weight and fast site installation for new build and renovation projects.
Key Features
- Uniform bead fusion for consistent thermal resistance across the panel
- Lightweight board that one worker can handle and place
- Clean cutting with a hot wire or hand saw on site
- Hydrophobicity above 97 percent with oxygen index above 30 percent
Technical Specifications
| Product Type | Standard EPS Board |
| Material | Expanded polystyrene bead with flame retardant additive |
| Model Grade | EPS-STD/20 |
| Thermal Conductivity | 0.037 W/(m.K) at 25 C |
| Density | 15 - 22 kg/m3 |
| Compressive Strength | >= 60 kPa |
| Hydrophobicity | >= 97% |
| Oxygen Index | >= 30% |
| Fire Performance | GB 8624 Class B1 / B2 |
| Dimensional Stability | <= 2.0% at 70 C, 48 h |
| Service Temperature | -50 to 75 C |
| Thickness | 20 mm |
| Standard Size | L 600 / 900 / 1200 mm, W 600 / 900 mm |
| Application | Exterior wall thermal protection, ETICS substrate, renovation cladding |
Applications
New residential and commercial exterior walls, facade renovation, ETICS substrates and infill panels behind cladding.
Packing and Delivery
EPS insulation products are typically packed with polyethylene film or other suitable protective packaging. Packaging methods can be adjusted according to product dimensions and transportation requirements. Store products in a dry, well-ventilated area, protected from rain, prolonged direct sunlight, and ignition sources.
MYREAL supplies exterior wall EPS insulation board worldwide. Contact us for datasheets, samples and project pricing.
Contact Person: Mrs. Betsy Ouyang
Tel: +86 17740800950
Economical EPS Insulation Board 80 mm Standard Panel For Cost Effective Building Insulation
Standard grade EPS board that delivers basic thermal...
Dimensionally Stable EPS Board 70 mm Panel For Roof Deck Wall Application Use
Standard EPS board produced with controlled bead fusion...
High Density EPS Floor Board 100 mm Rigid Panel For Underfloor Thermal Insulation
High density EPS board with 30 - 60 kg/m3 density for...
ETICS EPS Insulation Board 60 mm Render Ready Panel For External Wall System Renovation
Standard EPS board dimensioned for external thermal...
