Large Format Marble Look Glazed Ceramic Insulation Panel 1200x900mm Lightweight Exterior Facade

Large Format Glazed Ceramic Insulation Panel 1200x900mm 10kg Lightweight

In short: Large format glazed ceramic insulation panel, 1200x900 mm, 10 kg/m2 at 40 mm, marble look stone grain, Class A1, for fast facade installation.

Large format panels reduce the number of joints on an elevation, and fewer joints mean fewer leak paths and a faster programme. This 1200x900 mm marble look ceramic facade board covers 1.08 m2 per piece at about 10 kg/m2, so a two person team can set a large area without a crane.

The stone grain is fired into the 40 mm body at 1200C, giving a surface that resists UV, frost and urban pollution. Panel edges are square cut with a plus or minus 1 mm tolerance, which allows a tight 8-10 mm open joint and a clean, flat elevation.

Core Advantages

• Class A1 Fire Performance: This large format glazed ceramic insulation panel 1200x900mm 10kg lightweight is non-combustible from surface to core to GB 8624, with no dripping, no heavy smoke and no toxic gas release, which suits large format exterior facades and feature elevations.
• Fired-in Marble Pattern: The large format marble grain is generated in the body at 1200C, so it does not peel, chalk or fade like a printed or coated surface.
• Low Dead Load: About 10 kg/m2 at 40 mm, roughly one quarter of a 30 mm marble slab, which keeps anchors, keel steel and crane time down.
• Stable Colour Lot to Lot: A fixed pigment recipe and firing curve hold the large format marble grain inside the approved tolerance on repeat orders.
• Weather and Pollution Resistance: Closed cells and a sintered skin resist water penetration, 25 freeze-thaw cycles and urban staining; cleaning needs water, not chemical stone restorers.
• Fewer Joints per Square Metre: A 1200x900 mm module covers 1.08 m2, cutting joint length and sealant consumption by roughly a third against 600x600 mm panels.

Technical Data

Application

• Office and residential tower facades
• Airport and transport hub wall cladding
• Shopping centre feature elevations
• Industrial park entrance buildings
• Interior atrium and escalator wall panels

Installation & Fixing

Fix on vertical aluminium rails with stainless back-groove anchors and a 10 mm open joint. Set out from the building centreline so cut panels land at corners and concealed returns.

Packing

The large format glazed ceramic insulation panel 1200x900mm 10kg lightweight is supplied on plywood pallets with PE film, corner protection and edge guards, about 1.2 tons per pallet, loaded into 20ft or 40ft containers with fumigation-free packing. Store under cover, keep pallets level and avoid point loads on the decorated face. Special sizes, corner pieces and window returns can be produced to drawing.

FAQ

Q: Can you supply other large formats?

A: Yes. 1200x900 mm is standard; 1200x1200 mm and 1600x800 mm are produced to order with a minimum run.

Q: Is the panel flat enough for a tight joint?

A: Flatness is controlled to 1 mm over the panel face, which supports an 8-10 mm open joint on a ventilated facade.

Q: How many panels fit in a container?

A: A 20ft container holds about 500 m2 on pallets; exact loading depends on thickness and packing configuration.

Share your project area, storey height and target marble reference with our technical team, and we will send a panel schedule, fixing proposal and quotation for the large format glazed ceramic insulation panel 1200x900mm 10kg lightweight within two working days.

Key Facts