Density Controlled Ceramic Foam Board For Lightweight Facade Insulation
Basic Properties
Trading Properties
| Product Name: | Low-Density Ceramic Foam Insulation Board | Application: | Thermal Insulation In Furnaces, Kilns, And High-temperature Equipment |
|---|---|---|---|
| Density: | 0.2 - 0.6 G/cm³ | Compressive Strength: | 0.76 MPa |
| Flexural Strength: | 1.8 MPa | Structure: | Closed-cell Foamed Ceramic |
| Fire Performance: | Class A1 Non-combustible (GB 8624) | Thermal Conductivity: | 0.067 W/(m·K) At 25°C (GB/T 10294) |
| Standard Size: | 900x600 / 1200x600 / 1200x900 Mm | Certification: | GB 8624; GB/T 5486; GB/T 3810 |
| Form: | Foam | Temperatureresistance: | Up To 1600°C |
| Fireresistance: | Excellent | Material: | Ceramic |
| Chemicalstability: | High | Environmentalimpact: | Non-toxic And Recyclable |
| Lightweight: | Yes | Color: | White To Off-white |
| Porosity: | 80% - 90% | Thermalconductivity: | Low |
| Productname: | Ceramic Foam Insulation | Waterabsorption: | Low |
| Compressivestrength: | 1 - 5 MPa |
Low-Density Ceramic Foam Insulation Board
On tall or retrofit facades every kilogram of dead load matters, so insulation should be light without being weak. This lightweight closed-cell ceramic foam insulation board has a density of no more than 280 kg/m³ yet still reaches 0.76 MPa compressive strength and 1.8 MPa flexural strength, so it carries its own weight and resists handling damage. Because it is a closed-cell ceramic foam insulation board, the low weight comes from the sealed pore structure rather than from sacrificing solidity.
That combination of low density and real strength reduces structural demand on brackets, adhesives and the facade system, and it makes this ceramic foam insulation board faster and safer to lift and install on site. The board is also Class A1 non-combustible and moisture resistant, so the lightweight advantage does not compromise fire or weather performance. For high-rise and cladding projects, this lightweight closed-cell ceramic foam insulation board is an efficient, load-friendly specification.
Core Advantages
- Lightweight Build: Density of no more than 280 kg/m³ lowers dead load on the facade and its fixings.
- High Strength: 0.76 MPa compressive and 1.8 MPa flexural strength resist handling and service loads.
- Closed-cell Structure: Sealed cells give low weight with good rigidity and low water absorption.
- Easier Installation: Lower weight per square meter speeds up lifting, cutting and fixing on site.
- Class A1 Fire Safety: Non-combustible to GB 8624, keeping fire performance intact at low density.
Technical Data
| Property | Value | Standard |
|---|---|---|
| Thermal Conductivity (25°C) | 0.067 W/(m·K) | GB/T 10294 |
| Density | ≤280 kg/m³ | GB/T 5486 |
| Coefficient of Thermal Storage | 1.6 W/(m²·K) | JG/T 511 |
| Non-combustibility | Class A1 | GB 8624 |
| Compressive Strength | 0.76 MPa | GB/T 5486 |
| Tensile Strength | 0.35 MPa | GB/T 5486 |
| Flexural Strength | 1.8 MPa | GB/T 5486 |
| Volumetric Water Absorption | 0.6% | GB/T 5486 |
| Frost Resistance | No cracks, peeling or damage after freeze-thaw test | GB/T 3810 |
| Chemical Resistance | GLA level | GB/T 3810 |
| Resistance to Stains | Level 5 | GB/T 3810 |
| Dimensional Stability (70±2°C,48h) | Length 0.1% / Width 0.1% / Thickness 0.2% | GB/T 8811 |
Application
- High-rise exterior facade cladding
- Lightweight facade insulation and decoration
- Large-format decorative exterior panels
- Facade weight-sensitive retrofit
- Prefabricated building facades
Packing
Myreal Ceramic Foam Insulation Boards are supplied in cartons or wooden pallets for ease of handling, transportation, storage and identification. Store indoors or under a waterproof covering. Special specifications can be customized.
FAQ
A: Density is no more than 280 kg/m³, which reduces facade and fixing dead load while keeping 0.76 MPa compressive strength.
A: No; this ceramic foam insulation board reaches 0.76 MPa compressive and 1.8 MPa flexural strength.
A: The ceramic foam insulation board is fired into a sealed closed-cell structure, which lowers weight and water uptake.
A: Yes, it is Class A1 non-combustible to GB 8624 and will not burn, drip or emit toxic smoke.
A: Yes; the board can be cut, drilled and grooved with ordinary tools and fixed with adhesive or mechanical fasteners.
A: MOQ is 100 square meters and delivery is 15-25 days after deposit; payment terms include T/T, L/C and Western Union.
Project Cases
Gemdale Yuyue Project — high-rise facade insulation application
|
Gemdale Yuyue Project
|
Gemdale Yuyue Project
|
Contact Person: Mrs. Betsy Ouyang
Tel: +86 17740800950
Recycled Content Low Carbon Ceramic Foam Insulation Board For Green Building Projects
Recycled-content low-carbon ceramic foam insulation board...
Water Repellent Moisture Proof Ceramic Foam Insulation Board For Exterior Wall
Water-repellent moisture-proof ceramic foam insulation...
Precision Machined Thermal Break Ceramic Foam Insulation Board For Curtain Wall
Precision-machined thermal-break ceramic foam insulation...
UV Stable Climate Proof Ceramic Foam Insulation Panel For Coastal Exterior Wall
UV-stable climate-proof ceramic foam insulation panel for...
