32K Glass Wool Board 30mm Lightweight Rigid Panel For Commercial Building Ceiling Heat Insulation
Basic Properties
Trading Properties
| Product Type: | Glass Wool Board | Material: | Centrifugal Glass Fiber With Thermosetting Resin Binder |
|---|---|---|---|
| Density: | 32 Kg/m3 | Thickness: | 30 Mm |
| Dimension: | 1200 X 600 X 30 Mm | Facing: | Unfaced, Aluminum Foil Or White PP Facing |
| Thermal Conductivity: | 0.033 W/(m.K) At 25 C | Noise Reduction Coefficient: | 0.90 |
| Fire Performance: | Class A | Hydrophobicity: | >= 98% |
| Heat Shrinkage Temperature: | >= 300 C | Average Fiber Diameter: | 6.0 Micron |
| Slag Inclusion Content: | 0% | Application: | Ceiling Cavity Heat Insulation Under Concrete And Metal Roof Slabs |
| Application: | Thermal Insulation, Acoustic Insulation | Temperatureresistance: | -60 To 450 °C |
| Dimensions: | Varies (rolls, Batts, Boards) | Packing: | PP,PE Woven Bags |
| Type: | Thermal Insulation Products | Healthsafety: | Requires Protective Gear During Installation |
| Thickness: | 25-200mm | Installationmethod: | Cutting And Fitting, Friction Fit Or Mechanical Fasteners |
| Materials: | Glass Wool | Compressionstrength: | Moderate |
| Density: | 10-100 Kg/m³ | Environmentalimpact: | Recyclable, Contains Recycled Glass |
| Color: | Yellow, White Or Pink | Port: | XINGANG |
| Fireresistance: | Non-combustible, Class A |
MYREAL 32K glass wool board is a lightweight rigid panel of 32 kg/m3 and 30 mm thickness, designed to sit above ceiling systems and inside roof ceiling cavities where weight matters but heat flow has to stop. The fine 6 micron fiber structure keeps conductivity at 0.033 W/(m.K) while the panel stays flat over long spans.
Technical Data
Application
Used above suspended and direct fixed ceilings to cut summer heat gain and winter heat loss from the roof void, with an added acoustic benefit.
- Ceiling cavity heat insulation under concrete and metal roof slabs
- Top floor ceiling insulation for offices, hotels and apartments
- Ceiling insulation above clean rooms and laboratories
- Lagging of ceiling plenum and service voids
- Heat insulation combined with acoustic absorption at soffit level
Why This Specification
- Only 32 kg/m3 - reduces dead load on ceiling grids and roof structures.
- 30 mm profile fits tight ceiling voids and shallow plenum spaces.
- 0.033 W/(m.K) conductivity at low density, so less mass for the same thermal result.
- Class A non-combustible board, safe above occupied ceiling systems.
- Clean cutting to 600 x 600 grid modules without crumbling.
Certifications and Test Reports
- GB 8624-2012 Class A non-combustible rating (composite aluminum foil faced board tested to A2 class)
- IMO FTP Code Part 1 (Res. MSC.307(88)) non-combustible material, MED/3.13
- MED 2014/90/EU Module B type examination certificate LR21133795MB (Lloyd's Register)
- MED 2014/90/EU Module D quality system certificate LR21324539MD, wheelmark authorisation
- USCG approval category 164.109/EC2814 under the EC-US mutual recognition agreement
- Formaldehyde / benzene series / acrylic acid emission: not detected (GB 18580, GB 7131)
FAQ
Contact Person: Mrs. Betsy Ouyang
Tel: +86 17740800950