24K Glass Wool Blanket 75mm Compression Packed Roll For Industrial Roof Heat Control 20m
Basic Properties
Trading Properties
| Product Type: | Glass Wool Blanket | Material: | Centrifugal Glass Fiber With Thermosetting Resin Binder |
|---|---|---|---|
| Density: | 24 Kg/m3 | Thickness: | 75 Mm |
| Dimension: | W 1200 Mm X L 20 M Per Roll | Facing: | Reinforced Aluminum Foil Or Plain |
| Thermal Conductivity: | 0.043 W/(m.K) At 25 C | Noise Reduction Coefficient: | 0.90 |
| Fire Performance: | Class A | Hydrophobicity: | >= 98% |
| Heat Shrinkage Temperature: | >= 300 C | Average Fiber Diameter: | 6.0 Micron |
| Slag Inclusion Content: | 0% | Application: | Industrial Factory Roof Heat Control And Solar Gain Reduction |
| Application: | Thermal Insulation, Acoustic Insulation | Temperatureresistance: | -60 To 450 °C |
| Dimensions: | Varies (rolls, Batts, Boards) | Packing: | PP,PE Woven Bags |
| Type: | Thermal Insulation Products | Healthsafety: | Requires Protective Gear During Installation |
| Thickness: | 25-200mm | Installationmethod: | Cutting And Fitting, Friction Fit Or Mechanical Fasteners |
| Materials: | Glass Wool | Compressionstrength: | Moderate |
| Density: | 10-100 Kg/m³ | Environmentalimpact: | Recyclable, Contains Recycled Glass |
| Color: | Yellow, White Or Pink | Port: | XINGANG |
| Fireresistance: | Non-combustible, Class A |
MYREAL 24K glass wool blanket is a medium density flexible roll for large industrial roofs. At 75 mm and 24 kg/m3 the blanket recovers fully after compression packing, so a 20 m roll covers 24 square meters and spans purlin spacing without gaps or cold bridges.
Technical Data
Application
Chosen for factories, steel plants and distribution centres where roof surface temperatures swing widely and the insulation must survive compression packing and long spans.
- Industrial factory roof heat control and solar gain reduction
- Steel structure workshop roofing insulation
- Distribution centre and hangar roof thermal insulation
- Compression packed export insulation for overseas projects
- Roof condensation control over metal decking
Why This Specification
- Compression packing recovers to full 75 mm thickness on site, cutting freight volume.
- 24 kg/m3 density balances cost and stiffness for long span roof bays.
- Class A non-combustible core over occupied industrial areas.
- 0.043 W/(m.K) conductivity with 98% hydrophobicity for humid plant environments.
- 20 m roll length reduces overlaps and installation time on large roofs.
Certifications and Test Reports
- GB 8624-2012 Class A non-combustible rating (composite aluminum foil faced board tested to A2 class)
- IMO FTP Code Part 1 (Res. MSC.307(88)) non-combustible material, MED/3.13
- MED 2014/90/EU Module B type examination certificate LR21133795MB (Lloyd's Register)
- MED 2014/90/EU Module D quality system certificate LR21324539MD, wheelmark authorisation
- USCG approval category 164.109/EC2814 under the EC-US mutual recognition agreement
- Formaldehyde / benzene series / acrylic acid emission: not detected (GB 18580, GB 7131)
FAQ
Contact Person: Mrs. Betsy Ouyang
Tel: +86 17740800950