IMITATION BRICK Realistic Brick Texture Lightweight Ceramic Foam Cladding Wall Panels
Basic Properties
Trading Properties
| Product Name: | Realistic Brick Texture Lightweight Ceramic Foam Board | Material: | Foamed Ceramic (inorganic Sintered Body) |
|---|---|---|---|
| Surface Pattern: | Realistic Brick Texture, Matte Fired Surface | Fire Performance: | Class A1 Non-combustible (GB 8624) |
| Certification: | GB 8624; GB 6566; GB/T 5486; ISO 9001 | Areal Weight: | About 10.0 Kg/m2 At 25 Mm |
| Service Life: | 25 Years With Normal Maintenance | Standard Size: | 600 X 600 Mm, Cut To Size Available |
| Water Absorption: | 0.6% | Thermal Conductivity: | 0.067 W/(m·K) At 25°C (GB/T 10295) |
| Thickness: | 25 Mm | Application: | Exterior Wall Cladding And Decoration |
The IMITATION BRICK ceramic foam board reproduces the texture, tone and joint rhythm of a traditional brick wall on a 600 × 600 × 25 mm ceramic panel that weighs roughly a third of the brickwork it replaces. The brick pattern is fired into the inorganic body, so the mortar lines and the face colour are part of the panel rather than a coating that can peel.
That distinction matters on renovation and infill projects. A brick facade normally means masonry support, wet trades and months of programme; with this board, the same visual result is achieved with adhesive or mechanical fixing over a levelled substrate, which keeps the structural load low and the site dry.
- Realistic brick texture with registered mortar lines
- Lightweight panel at around one third of equivalent brickwork
- Class A1 non-combustible inorganic ceramic body
- Consistent brick pattern across every panel
- Custom brick colours matched to a project sample
- Insulation and decorative finish combined in one 25 mm board
| Board size | 600 × 600 mm |
|---|---|
| Thickness | 25 mm |
| Density | 400 kg/m³ |
| Fire rating | Class A1 non-combustible |
| Thermal conductivity | 0.067 W/(m·K) at 25 °C |
| Water absorption | 0.6% |
| Brick module | Registered pattern, aligned across panels |
| Surface | Realistic brick texture |
- Exterior wall cladding with brick design intent
- Renovation of rendered walls to a brick appearance
- Residential facades and infill panels
- Landscape walls and boundary structures
Panels are set out on the brick module so courses line up across joints, then bonded or mechanically fixed to a levelled substrate. Because the pattern is registered to the board edge, adjacent panels continue the same course height, and cutting at reveals is done so the brick rhythm carries around the corner. Joints are finished to match the mortar line colour.
The brick face and mortar lines are formed in the mould and fired, so depth, edge shadow and colour variation read like real brickwork at close range.
About 10 kg/m² at 25 mm, roughly one third of a comparable brick skin, which reduces support steel and foundation load.
Yes. Brick tones are matched against a physical sample or a project reference before production.
Yes. The pattern is registered to the panel edge, so courses continue across joints when panels are set out on the brick module.
Boards are stacked face to face on timber pallets with corner protection and strapping, labelled by colour code so the brick tone stays consistent across each elevation.
MYREAL has supplied developers, consultants, design institutes, contractors and distributors since 2014, working from a manufacturing network with experienced technical teams. Each batch of imitation brick ceramic foam board is checked against GB 8624, GB 6566 and GB/T 5486 before shipment, and the brick tone is fired against a retained master sample so repeat orders stay visually consistent. Send your brick reference, panel size and quantity, and our engineers will confirm a tailored offer with samples.
Contact Person: Mrs. Betsy Ouyang
Tel: +86 177 4080 0950
IMITATION BRICK Realistic Brick Pattern Ceramic Foam Panel for Interior Wall Cladding
Realistic brick pattern fired into durable ceramic foam...
