IMITATION BRICK Realistic Brick Pattern Ceramic Foam Panel for Interior Wall Cladding
Basic Properties
Trading Properties
| Product Name: | Realistic Brick Pattern Ceramic Foam Panel | Material: | Foamed Ceramic (inorganic Sintered Body) |
|---|---|---|---|
| Surface Pattern: | Realistic Brick Pattern, Matte Fired Surface | Fire Performance: | Class A1 Non-combustible (GB 8624) |
| Certification: | GB 8624; GB 6566; GB/T 5486; ISO 9001 | Areal Weight: | About 7.6 Kg/m2 At 20 Mm |
| Service Life: | 25 Years With Normal Maintenance | Standard Size: | 800 X 400 Mm, Cut To Size Available |
| Water Absorption: | 0.6% | Thermal Conductivity: | 0.067 W/(m·K) At 25°C (GB/T 10295) |
| Thickness: | 20 Mm | Application: | Interior Wall And Landscape Decoration |
At 20 mm and 380 kg/m³, this IMITATION BRICK panel brings a brick wall into places where masonry would never be practical: interior feature walls, retail fit-outs, lift lobbies and landscape partitions. The brick pattern is fired into the ceramic face, so the texture survives handling, cleaning and years of use.
The panel is fixed directly to a levelled substrate with adhesive and, where required, perimeter fixings. No wet trades, no curing time and no additional load on the floor slab — which means a brick-look wall can be completed in a day rather than a week.
- Realistic brick pattern with defined mortar joints
- Low 380 kg/m³ density for interior and light structures
- Class A1 non-combustible inorganic ceramic body
- Consistent brick arrangement across each panel
- Customisable brick colours for project schemes
- Suitable for walls, partitions and landscape features
| Panel size | 800 * 400 mm |
|---|---|
| Thickness | 20 mm |
| Density | 380 kg/m³ |
| Weight | Approx. 7.6 kg per panel |
| Fire rating | Class A1 non-combustible |
| Thermal conductivity | 0.067 W/(m·K) at 25°C |
| Water absorption | 0.6% |
| Surface | Realistic brick pattern |
- Interior feature walls and reception areas
- Retail and hospitality fit-outs
- Landscape walls and garden partitions
- Lift lobbies and corridor cladding
Panels are cut and dry fitted before adhesive is applied, working from a datum line so the brick courses stay level. Adhesive is applied in ribs to the back of the panel, the unit is pressed into position and checked with a spirit level, and joints are finished with a mortar-tone sealant or left as a fine shadow line depending on the design intent.
Yes, with a sealed joint detail. Water absorption is 0.6%, so the panel does not soften or stain in humid interiors.
Joints can be filled with a mortar-tone sealant to read as brickwork, or left as a fine shadow line for a modern look.
Flat panels suit straight walls; curved work is achieved with segmented layouts rather than bending the panel.
Standard brick tones plus custom matching against a sample, so a scheme can follow an existing brick or a brand palette.
Panels are packed in cartons on timber pallets, face protected and labelled by colour and quantity, so interior fit-out crews can distribute panels room by room without restacking.
MYREAL has supplied developers, consultants, design institutes, contractors and distributors since 2014, working from a manufacturing network with experienced technical teams. Each batch of imitation brick ceramic foam panel is checked against GB 8624, GB 6566 and GB/T 5486 before shipment, and the brick tone is fired against a retained master sample so repeat orders stay visually consistent.
Send your brick reference, panel size and quantity, and our engineers will confirm a tailored offer with samples.
Contact Person: Mrs. Betsy Ouyang
Tel: +86 177 4080 0950
IMITATION BRICK Realistic Brick Texture Lightweight Ceramic Foam Cladding Wall Panels
Realistic brick texture fired into a lightweight 25mm...
