Class A1 Glazed Ceramic Insulation Panel with Fired-in Marble Pattern and Low Dead Load Sintered Stone Wall Panel
Basic Properties
Trading Properties
| Product Name: | Marble Look Glazed Ceramic Insulation Panel 30mm Sintered Stone Vein Wall | Material: | Foamed Ceramic (inorganic Sintered Body) |
|---|---|---|---|
| Surface Pattern: | Polished Marble Vein, Fired-in Stone-look Grain 0.3-0.5 Mm | Thickness: | 30 Mm |
| Standard Size: | 1200 X 600 Mm, Cut To Size Available | Areal Weight: | About 7.5 Kg/m2 At 30 Mm |
| Fire Performance: | Class A1 Non-combustible (GB 8624) | Thermal Conductivity: | 0.062 W/(m·K) At 25°C (GB/T 10295) |
| Water Absorption: | <=3% Volumetric (GB/T 5486) | Application: | Interior Feature Walls, Lift Lobbies And Reception Areas |
| Recycled Content: | Over 80% Industrial Solid Waste | Certification: | GB 8624; GB 6566; GB/T 5486; ISO 9001 |
| Service Life: | 25 Years With Normal Maintenance |
In short: Marble look glazed ceramic insulation panel, 30 mm, about 7.5 kg/m², fired-in stone vein, Class A1, for interior feature walls and lift lobbies.
Interior designers want the depth of marble without the movement, weight and maintenance that come with a quarried slab. This marble look decorative glazed ceramic insulation panel delivers a fired-in stone vein on a 30 mm sintered body, so a lobby wall can be delivered as a dry-fixed panel system instead of a stone subcontract with wet trades.
The surface is polished to a soft sheen and the vein is generated in the body at 1200°C, which means the pattern continues through cut edges and reveals. At about 7.5 kg/m² the board can be fixed to lightweight partitions, and the Class A1 rating keeps corridor and lobby linings inside fire specifications.
- Class A1 Fire Performance: This marble look glazed ceramic insulation panel 30 mm sintered stone vein wall is non-combustible from surface to core to GB 8624, with no dripping, no heavy smoke and no toxic gas release, which suits interior feature walls, lift lobbies and reception areas.
- Fired-in Marble Pattern: The polished marble vein is generated in the body at 1200°C, so it does not peel, chalk or fade like a printed or coated surface.
- Low Dead Load: About 7.5 kg/m² at 30 mm, roughly one quarter of a 30 mm marble slab, which keeps anchors, keel steel and crane time down.
- Stable Colour Lot to Lot: A fixed pigment recipe and firing curve hold the polished marble vein inside the approved tolerance on repeat orders.
- Weather and Pollution Resistance: Closed cells and a sintered skin resist water penetration, 25 freeze-thaw cycles and urban staining; cleaning needs water, not chemical stone restorers.
- Edge Detail Without Trimming: The fired body carries the vein through the cut edge, so external corners and window reveals need no separate stone trim.
| Property | Value | Standard |
|---|---|---|
| Non-combustibility | Class A1 | GB 8624 |
| Surface | Polished marble vein, fired-in grain 0.3–0.5 mm | Sample approval |
| Areal Weight (30 mm) | About 7.5 kg/m² | Batch weighing |
| Thermal Conductivity (25°C) | 0.062 W/(m·K) | GB/T 10295 |
| Density | 0.55 g/cm³ | GB/T 5486 |
| Compressive Strength | ≥ 0.60 MPa | GB/T 5486 |
| Flexural Strength | ≥ 0.60 MPa | GB/T 5486 |
| Volumetric Water Absorption | ≤ 3% | GB/T 5486 |
| Frost Resistance | 25 cycles, no cracking or flaking | GB/T 5486 |
| Stain Resistance | Level 5 after surface sealing | GB/T 3810 |
| Dimensional Stability (70 ± 2°C, 48 h) | Length 0.1% / Width 0.1% / Thickness 0.2% | GB/T 8811 |
| Standard Size | 1200 × 600 mm, cut to size available | Factory tolerance ± 1 mm |
| Standard Thickness | 30 mm (other thickness on request) | Factory standard |
| Recycled Content | Over 80% industrial solid waste | Batch test report |
| Radiological Limits | IRa ≤ 0.3, Ir ≤ 0.7; formaldehyde-free | GB 6566 |
- Hotel lobbies, reception desks and feature walls
- Office reception and boardroom wall linings
- Lift lobbies and corridor feature panels
- Retail flagship interiors and display walls
- Residential entrance halls and staircase walls
Interior walls use adhesive plus mechanical anchors on flat substrates, or a concealed aluminium rail system where partitions are lightweight. Keep joints at 3–5 mm with a neutral cure sealant, and set out panels from the main sight line.
The marble look glazed ceramic insulation panel 30 mm sintered stone vein wall is supplied on plywood pallets with PE film, corner protection and edge guards, about 1.2 tons per pallet, loaded into 20 ft or 40 ft containers with fumigation-free packing. Store under cover, keep pallets level and avoid point loads on the decorated face. Special sizes, corner pieces and window returns can be produced to drawing.
A: Standard is a soft polished sheen; honed, matte and silk finishes are available on request with the same fired-in vein.
A: Yes. The board is Class A1 and dimensionally stable, and cut-outs for sockets and screens are produced to your shop drawings.
A: A 30 mm marble slab weighs 80 kg/m² or more and needs a stone subframe; this board is about 7.5 kg/m² and fixes directly to partitions.
Share your project area, storey height and target marble reference with our technical team, and we will send a panel schedule, fixing proposal and quotation for the marble look glazed ceramic insulation panel 30 mm sintered stone vein wall within two working days.
| Material | Foamed inorganic ceramic (perlite tailings based) |
| Thickness | 30 mm |
| Areal weight | About 7.5 kg/m² |
| Panel size | 1200 × 600 mm, cut to size |
| Fire rating | Class A1 non-combustible, GB 8624 |
| Water absorption | ≤ 3% volumetric, GB/T 5486 |
| Thermal conductivity | 0.062 W/(m·K) at 25°C, GB/T 10295 |
| Maximum working temperature | 1200°C |
| Recycled content | Over 80% industrial solid waste |
| Order terms | MOQ 2000 m², USD 30–36/m², 2–3 weeks |
Contact Person: Mrs. Betsy Ouyang
Tel: +86 177 4080 0950
Fireproof Glazed Ceramic Insulation Panel 18mm 20kg/m2 for Exterior Facade Cladding
Class A1 fireproof glazed ceramic insulation panel, 18mm,...
Salt Fog Resistant Glazed Ceramic Insulation Panel 30mm Coastal Facade
Salt fog resistant glazed ceramic insulation panel, 30...
Impact Resistant Glazed Ceramic Insulation Panel 25mm Corridor Cladding
Impact resistant glazed ceramic insulation panel, 25 mm,...
Book Matched Glazed Ceramic Insulation Panel 25mm Hotel Lobby Feature Wall
Book matched glazed ceramic insulation panel, 25 mm,...
