Class A1 Fire Performance Prefabricated Cassette Insulated Wall Panel with Fired-in Marble Pattern Ceramic Insulation Panel

In short: Prefabricated glazed ceramic insulation wall module — a 50 mm panel with built-in insulation, Class A1 fire performance, engineered for modular and fast-track building envelopes.

On a modular project, the envelope is a factory task, not a site task. This prefabricated marble-look ceramic wall unit arrives as a 50 mm insulated cassette with the ceramic face, insulation, frame and lifting points already assembled — so the module is weathertight the day it is craned into place.

The cassette is built around a galvanised steel frame with a Class A1 ceramic face and closed-cell insulation, and each unit is tested for dimensional square before dispatch. Service penetrations and window openings are formed in the factory to the module drawing.

• Class A1 Fire Performance: Non-combustible from surface to core to GB 8624, with no dripping, no heavy smoke and no toxic gas release — ideal for prefabricated and modular building envelopes.
• Fired-in Marble Pattern: The prefab marble face is generated in the body at 1200°C, so it does not peel, chalk or fade like a printed or coated surface.
• Low Dead Load: About 13 kg/m² at 50 mm — roughly one quarter of a 30 mm marble slab — which keeps anchors, keel steel and crane time down.
• Stable Colour Lot to Lot: A fixed pigment recipe and firing curve hold the prefab marble face inside the approved tolerance on repeat orders.
• Weather and Pollution Resistance: Closed cells and a sintered skin resist water penetration, 25 freeze-thaw cycles and urban staining; cleaning needs water, not chemical stone restorers.
• Weathertight on the Day of Lift: The insulated cassette arrives complete with frame, face and lifting points, so the module envelope closes as soon as it is set.

• Modular hotel and student accommodation
• Prefabricated plant rooms and switch rooms
• Fast-track school classroom blocks
• Site offices and welfare buildings
• Remote projects with limited site labour

Cassettes are craned and fixed to the module frame with proprietary brackets. The inter-module joint is then sealed with a compression gasket and a rainscreen cover strip.

The prefabricated glazed ceramic insulation panel 50 mm insulated wall module is supplied on plywood pallets with PE film, corner protection and edge guards — approximately 1.2 tons per pallet — loaded into 20 ft or 40 ft containers with fumigation-free packing. Store under cover, keep pallets level and avoid point loads on the decorated face. Special sizes, corner pieces and window returns can be produced to drawing.

Share your project area, storey height and target marble reference with our technical team, and we will send a panel schedule, fixing proposal and quotation for the prefabricated glazed ceramic insulation panel 50 mm insulated wall module within two working days.