Acid Rain Resistant Glazed Ceramic Insulation Panel 25mm Urban Facade Wall

Acid Rain Resistant Glazed Ceramic Insulation Panel 25mm Urban Facade Wall

In short: Acid rain resistant glazed ceramic insulation panel, 25 mm, fired glaze surface, Class A1, for urban and industrial facades.

In a city centre the facade sees sulphur dioxide, nitrogen oxides and repeated wet dry cycles, and a painted or coated panel starts to chalk within a few seasons. This acid rain resistant glazed ceramic insulation panel carries a fired glaze that is chemically inert, so the marble pattern does not stain or dull under acid rain.

The 25 mm body is sealed to 0.6 percent water absorption, which stops the acid bearing water from entering the panel and attacking the decoration from behind. The glaze is fired at 1200C and reaches level 5 stain resistance, so pollution deposits wash off with water and a neutral detergent.

Core Advantages

• Class A1 Fire Performance: This acid rain resistant glazed ceramic insulation panel 25mm urban facade wall is non-combustible from surface to core to GB 8624, with no dripping, no heavy smoke and no toxic gas release, which suits urban and industrial facades exposed to acid rain and pollution.
• Fired-in Marble Pattern: The textured marble grain is generated in the body at 1200C, so it does not peel, chalk or fade like a printed or coated surface.
• Low Dead Load: About 30 kg/m2 at 20 mm, roughly one quarter of a 30 mm marble slab, which keeps anchors, keel steel and crane time down.
• Stable Colour Lot to Lot: A fixed pigment recipe and firing curve hold the textured marble grain inside the approved tolerance on repeat orders.
• Weather and Pollution Resistance: Closed cells and a sintered skin resist water penetration, 25 freeze-thaw cycles and urban staining; cleaning needs water, not chemical stone restorers.
• Chemically Inert Fired Glaze: The glaze is fired at 1200C and resists acid rain and alkaline cleaning agents without chalking or colour change.

Technical Data

Application

• High rise facades in city centres
• Industrial park and factory office buildings
• Buildings facing highways and heavy traffic
• Chemical and processing plant exteriors
• Commercial buildings in polluted urban areas

Installation & Fixing

Lay on a screed or mortar bed with a 3-5 mm joint and epoxy grout in wet areas, maintaining a 1-2% fall to drainage. Use a 10 mm notched trowel and back butter for full adhesion.

Packing

The acid rain resistant glazed ceramic insulation panel 25mm urban facade wall is supplied on plywood pallets with PE film, corner protection and edge guards, about 1.2 tons per pallet, loaded into 20ft or 40ft containers with fumigation-free packing. Store under cover, keep pallets level and avoid point loads on the decorated face. Special sizes, corner pieces and window returns can be produced to drawing.

FAQ

Q: How does it resist acid rain?

A: The fired glaze is chemically inert and tested against acid and alkali exposure; pollution deposits do not etch the surface as they do on a painted panel.

Q: How should it be cleaned?

A: Wash with water and a neutral detergent once or twice a year; no acidic stone restorer is needed or recommended.

Q: Does it fade in polluted air?

A: No. The colour is in the fired glaze, so UV and pollutants do not reach the pigment as they would in a coating.

Share your project area, storey height and target marble reference with our technical team, and we will send a panel schedule, fixing proposal and quotation for the acid rain resistant glazed ceramic insulation panel 25mm urban facade wall within two working days.

Key Facts