SANDSTONE Low Water Absorption Weatherproof Ceramic Foam Tile Coastal Facade Cladding

Water is what ages a facade. This sandstone ceramic foam tile holds water absorption at 0.6%, so rain runs off instead of soaking into the body, and the sandstone face keeps its tone instead of darkening into patches after the first wet season.

The tile is fired as a single inorganic body, so there is no facing layer to peel and no organic resin to chalk under salt spray. In coastal projects, that combination removes two of the most common maintenance calls on decorative walls.

• Water absorption of 0.6% for wet and coastal climates
• Frost and salt spray resistant inorganic ceramic body
• Class A1 non-combustible, suitable for public buildings
• Lightweight porous core adds thermal insulation value
• Sandstone texture colour stays stable under UV exposure
• Insulation and decoration combined in a single tile

• Coastal and humid climate facades
• Exterior wall cladding on leisure and resort buildings
• Landscape walls and boundary structures
• Wet area walls in covered external zones

Tiles are laid to a setting-out grid, working from the bottom course upward so that each row supports the next. The 450x900mm sandstone ceramic foam tile is fixed with cement-based adhesive over a prepared substrate, with joints kept to a consistent 4–6mm and tooled before curing. In coastal locations, stainless accessories and a drained cavity detail are recommended so salt-laden moisture never sits against the tile.

Tiles are packed face to face in cartons on timber pallets, with edge protection and moisture barrier wrapping. Mixed colour orders are separated by shade and labelled, keeping the tile layout consistent when several elevations are fixed in parallel.

MYREAL has supplied developers, consultants, cost engineers, design institutes, contractors, EPCs and distributors since 2014, working from a manufacturing network with experienced technical teams. Every batch is checked against GB 8624, GB 6566 and GB/T 5486 before shipment, so the sandstone ceramic foam tile you receive matches the specification you approved. Tell us your board size, thickness, colour direction and project quantity, and our engineers will confirm a tailored offer with samples.