Recommend Other Products
Thermal Break PUR Insulation Board 60 mm Closed Cell Core For Roof Wall Panels
Roof and wall panels only perform as well as the board inside them. This 60 mm PUR board is foamed to fifty kilograms per cubic metre and trimmed square, so a laminator can bond st Read More
Rigid Foam Insulation Core PUR Board 50 mm High Density Closed Cell Panel
A rigid foam insulation core decides how a sandwich panel behaves after twenty years on a roof. This 50 mm PUR board is foamed to a core density of fifty kilograms per cubic metre, Read More
Economical EPS Insulation Board 80 mm Standard Panel For Cost Effective Building Insulation
Standard grade EPS board that delivers basic thermal insulation at the lowest material cost. It suits volume housing, temporary works and projects where budget targets drive the in Read More
High Density EPS Floor Board 100 mm Rigid Panel For Underfloor Thermal Insulation
High density EPS board with 30 - 60 kg/m3 density for floors carrying screed, underfloor heating pipe and finished floor loads. Compressive strength from 200 to 800 kPa resists poi Read More
Graphite EPS Insulation Board 50 mm Low Lambda Panel For Energy Efficient Building Wall
Graphite modified EPS board with infrared absorbing particles that lower thermal conductivity to 0.030 - 0.032 W/(m.K). The board helps walls meet tighter energy codes without thic Read More
WA200 XPS Board Freeze Thaw Resistant Closed Cell Panel For Cold Climate Facade Insulation
WA200 freeze thaw resistant XPS board, 60 mm, retaining over 90% of its compressive strength after 50 freeze thaw cycles, for internal insulation of external walls. Read More
ETICS Low Conductivity XPS Board 40 mm Rigid Panel For Low Energy Wall Retrofit
WA150 ETICS XPS board, 40 mm, with conductivity from 0.026 W/(m.K) and a planed face for adhesive bonded external wall insulation on low energy buildings. Read More
Extruded Polystyrene XPS Board 100 mm Rigid Panel For Foundation Wall Insulation
FL500 extruded polystyrene board, 100 mm and 500 kPa, for foundation and ground slab insulation in direct soil contact where backfill and edge loads are high. Read More
