SANDSTONE Natural Sandstone Finish Ceramic Foam Facade Panel Building Cladding System

This sandstone ceramic foam facade panel is produced in a 600x1200x30mm format so that facades read as large stone fields rather than a grid of small tiles. The fired surface reproduces the bedding lines and mineral tone of quarried sandstone, while the ceramic core supplies the insulation that solid stone cannot offer.

Design teams specify the panel where a warm natural stone character is required but structural load, installation height or fire class rule out a 30mm stone slab. At roughly half the weight of comparable sandstone, the panel keeps fixing details simple and lets the same material run from the plinth to the parapet without a change of system.

• Sandstone bedding pattern with matte mineral grain
• Class A1 non-combustible inorganic ceramic core
• Lightweight 30mm panel simplifies facade fixing on tall buildings
• Thermal insulation lowers cooling load in hot climates
• Water absorption of 0.6% protects the finish in rainy regions
• Decorative finish and insulation delivered in one panel

• Ventilated facade cladding on commercial buildings
• Building facade decoration with stone design intent
• Residential exterior walls in warm climates
• Podium and entrance feature cladding

Facade installation starts with a surveyed sub-frame. Brackets are set to line and level, rails are fixed, and each 600x1200x30mm sandstone ceramic foam facade panel is engaged with stainless clips or structural adhesive according to the engineer's detail. The 30mm thickness gives enough edge depth for concealed fixing, so no visible fastener interrupts the sandstone field. Cavity drainage and ventilation are maintained behind the panel, letting moisture escape and keeping the facade dry.

Panels travel vertically in reinforced crates with face protection and strapping, palletised in the sequence of the facade zones so the site crew can install level by level without re-sorting.

MYREAL has supplied developers, consultants, cost engineers, design institutes, contractors, EPCs and distributors since 2014, working from a manufacturing network with experienced technical teams. Every batch is checked against GB 8624, GB 6566 and GB/T 5486 before shipment, so the sandstone ceramic foam facade panel you receive matches the specification you approved. Tell us your board size, thickness, colour direction and project quantity, and our engineers will confirm a tailored offer with samples.