PURE COLOUR A1 Non-Combustible Solid Color Ceramic Foam Board High Rise Facade Panels

Where fire safety governs the facade specification, a decorative colour must not come at the cost of combustibility. This PURE COLOUR fire resistant ceramic foam board is Class A1 non-combustible, inorganic throughout, and carries its colour in the fired body rather than in an organic coating.

The 40mm thickness raises thermal resistance at the same time, so a single panel satisfies fire compartment requirements, insulation targets and the architectural colour scheme. That combination removes the layered build-up that normally requires three separate trades on a high-rise elevation.

Compliance paperwork matters as much as the panel itself. Each shipment includes GB 8624 test reports, batch certificates and fixing details, so the approved fire strategy can be verified at handover without chasing additional documentation from the factory.

Because the colour and the fire performance come from the same inorganic body, there is no decorative layer that can delaminate under heat, and the panel can be re-finished or cut on site without affecting the A1 classification.

• Class A1 non-combustible, tested to GB 8624
• Fully inorganic body with no combustible binder
• Uniform solid colour that will not char or blister
• 40mm thickness raises thermal resistance
• Lightweight porous structure suits high-rise facades
• Water absorption of 0.6% for weather stability

• High-rise facades with strict fire codes
• Fire compartment walls and escape routes
• Public buildings such as schools and hospitals
• Industrial buildings requiring non-combustible cladding

The board is fixed continuously to a non-combustible substrate with staggered joints and sealed penetrations using approved details. Because the panel contains no organic binder, no additional flame barrier is required behind it, keeping the certified assembly simple to inspect and maintain.

Boards are palletised face to face with corner protection and strapping, and each pallet carries fire certificate documentation so the site team can verify compliance on delivery.