logo

MYREAL NBR Rubber Insulation Sheet for Chilled Water Pipe Systems

Basic Properties

Place of Origin:Shanghai, China
Brand Name:MYREAL
Certification:ISO 9001:2015, CE
Model Number:FR-13100/ST

Trading Properties

Minimum Order Quantity:1 carton
Standard Packaging:Cartons / PE Bags
Delivery Time:15-20 days
Payment Terms:T/T
Supply Ability:Subject to order quantity and specifications
Specifications
Model Number: FR-13100/ST Thickness: 13mm
Roll Width: 1.0 M (1.5 M Optional) Density: 45 Kg/m3
Thermal Conductivity: ≤0.032-0.034 W/(m.K) Fire Rating: B1
Oxygen Index: ≥32 % Service Temperature: -50 C To +110 C
Water Vapor Permeability: ≥10,000 G/m2-h Compression Recovery: ≥70 %
Noise Reduction: 30-35 DB Dimensional Stability: ≤10 %
Application: Chilled Water Pipe Systems Product Name: NBR Rubber Insulation Sheet
Product Description
Product Overview

The MYREAL NBR rubber insulation sheet is engineered for chilled water pipe systems, valve bodies, and fittings where a thin, flexible wrap is required. The 13mm sheet is supplied at 45 kg/m³ with a thermal conductivity of ≤0.034 W/(m·K) and a service range of −50 °C to +110 °C.

The NBR formulation gives the rubber foam insulation sheet a tight closed-cell structure that resists water vapour and keeps the pipe surface dry. Because the sheet is flexible, it can be wrapped around elbows, tees, and reducers without cutting and gluing small segments — the point where most cold pipe insulation systems lose their vapour seal.

Sheets are produced on a continuous extrusion and foaming line and skived to 13mm within ±1 mm. Incoming compound is tested for density and cell structure, and a retained sample from each batch is kept for two years, so any technical claim can always be checked against production records.

Myreal Energy Saving (Shanghai) Co., Ltd has supplied NBR rubber foam insulation sheet to mechanical contractors in Europe, the Middle East, and Southeast Asia since 2009. The installation guidance issued with each order is drawn from those chilled water and refrigeration projects.

Technical Specifications
Parameter Specification
ProductMYREAL NBR Rubber Insulation Sheet for Chilled Water Pipe Systems
ModelFR-13100/ST
Thickness13mm
Nominal Density45 kg/m³
Standard Width1.0 m (1.5 m optional)
ApplicationChilled water pipe systems
Service Temperature−50 °C to +110 °C
Density Range40–60 kg/m³
Thermal Conductivity (0 °C)≤0.032–0.034 W/(m·K)
Fire RetardantB1
Oxygen Index≥32 %
Smoke Classification≤75 %
Water Absorption≤10 %
Water Vapor Permeability≥10,000 g/m²·h
Tear Strength≥3.5 N/cm
Dimensional Stability (105 °C, 7 days)≤10 %
Compression Recovery (50 %, 72 h)≥70 %
Noise Reduction30–35 dB
UV ResistanceNo surface cracks in 460 h
Ozone Resistance202 MPa, 200 h, no cracks
Aging Resistance150 h, slight colour change, no cracks
Chemical ResistanceStable to building material chemicals
Standard Roll Sizes
Width (m) Product Code Thickness (mm) Area (m²/roll) Length (m)
1FR-06100/ST63030
1FR-10100/ST102020
1FR-13100/ST131515
1FR-15100/ST151313
1FR-20100/ST201010
1FR-25100/ST2588
1FR-30100/ST3066
1FR-35100/ST3566
1.5FR-13150/ST1322.515
1.5FR-15150/ST1519.513
1.5FR-20150/ST201510
1.5FR-25150/ST25128
1.5FR-30150/ST3096
1.5FR-35150/ST3596
1.5FR-40150/ST407.55
1.5FR-50150/ST5064
Key Advantages
  • The 13mm NBR rubber foam insulation sheet wraps elbows, tees, and valves without cutting small segments, so the vapour seal stays continuous.
  • Thermal conductivity of ≤0.034 W/(m·K) controls heat gain on 6 to 12 °C chilled water lines.
  • Water vapor permeability above 10,000 g/m²·h keeps moisture out of the closed-cell core and limits corrosion under insulation.
  • A service range of −50 °C to +110 °C covers chilled water, condensate, and low-pressure hot water in one product.
  • Density of 45 kg/m³ is consistent across the sheet, so the wrapped thickness matches the design calculation.
  • B1 (GB 8624) fire performance suits plant rooms and occupied buildings.
Typical Applications
  • Chilled water pipe and fitting insulation
  • Fan coil and air handling unit pipework
  • Condensate drain lines
  • Refrigeration suction and liquid lines
  • Valve, flange, and strainer wrapping
Frequently Asked Questions
Why use an NBR rubber foam insulation sheet for chilled water pipe?

NBR compound gives a fine closed-cell structure with a high water vapor permeability above 10,000 g/m²·h, which is what keeps a chilled water pipe dry. The rubber foam insulation sheet flexes around fittings, so the installer can maintain one continuous vapour barrier from valve to valve.

Is 13mm thick enough for a chilled water line?

For indoor pipes at 6 to 12 °C in a conditioned plant room, 13mm usually keeps the surface above dew point. In humid or outdoor locations we recommend 20mm or 25mm and provide a condensation calculation for the project.

How should joints and valve bodies be sealed?

Butt-fit the sheet, bond with contact adhesive applied to both surfaces, and seal every joint and overlap with adhesive or self-adhesive tape. Valve bodies and flanges are best wrapped with a flexible sheet rather than rigid sections.

Can the sheet be supplied in rolls instead of flat sheets?

Yes. The same NBR rubber foam insulation sheet can be produced in rolls for pipe wrapping, and sheet size and roll length can be adjusted to the order.

Contact Details
Myreal Energy Saving (Shanghai) Co., Ltd.

Contact Person: Mrs. Betsy Ouyang

Tel: +86 177 4080 0950

Send your inquiry directly to us
(0/3000)