MYREAL NBR PVC Rubber Foam Insulation Board for Building Insulation
Basic Properties
Trading Properties
| Model Number: | FR-15100/ST | Thickness: | 15mm |
|---|---|---|---|
| Roll Width: | 1.0 M (1.5 M Optional) | Density: | 45 Kg/m3 |
| Thermal Conductivity: | ≤0.032-0.034 W/(m.K) | Fire Rating: | B1 |
| Oxygen Index: | ≥32 % | Service Temperature: | -50 C To +110 C |
| Water Vapor Permeability: | ≥10,000 G/m2-h | Compression Recovery: | ≥70 % |
| Noise Reduction: | 30-35 DB | Dimensional Stability: | ≤10 % |
| Application: | Building Insulation | Product Name: | NBR PVC Rubber Foam Insulation Board |
The MYREAL NBR PVC rubber foam insulation board is engineered for building insulation, including chiller pipe, valve and fitting wrap in plant rooms and risers. Sheets are supplied at 1 m * 2 m in 15 mm thickness at 45 kg/m³, with thermal conductivity of ≤0.034 W/(m·K).
Chiller pipe wrap must accomplish three objectives simultaneously: control heat gain, stop condensation and meet the fire requirement of the plant room. The NBR PVC rubber foam insulation sheet covers all three in one 15 mm layer, and it is soft enough to be cut with a knife and bonded with contact adhesive around valves, strainers and flanges.
Sheets are produced on a continuous extrusion and foaming line and skived to 15 mm within ±1 mm. Incoming compound is tested for density and cell structure, and a retained sample from each batch is kept for two years so any fire or thermal question can be traced back to production records.
Myreal Energy Saving (Shanghai) Co., Ltd has supplied NBR PVC rubber foam insulation sheet to mechanical and building services contractors in Europe, the Middle East and Southeast Asia since 2009, mainly for chiller plants, district cooling stations and commercial buildings.
| Parameter | Specification |
|---|---|
| Product | MYREAL NBR PVC Rubber Foam Insulation Board for Building Insulation |
| Model | FR-15100/ST |
| Thickness | 15 mm |
| Nominal Density | 45 kg/m³ |
| Standard Width | 1.0 m (1.5 m optional) |
| Application | Building insulation |
| Service Temperature | -50 °C to +110 °C |
| Density Range | 40–60 kg/m³ |
| Thermal Conductivity (0 °C) | ≤0.032–0.034 W/(m·K) |
| Fire Retardant | B1 |
| Oxygen Index | ≥32 % |
| Smoke Classification | ≤75 % |
| Water Absorption | ≤10 % |
| Water Vapor Permeability | ≥10,000 g/m²·h |
| Tear Strength | ≥3.5 N/cm |
| Dimensional Stability (105 °C, 7 days) | ≤10 % |
| Compression Recovery (50 %, 72 h) | ≥70 % |
| Noise Reduction | 30–35 dB |
| UV Resistance | No surface cracks in 460 h |
| Ozone Resistance | 202 MPa, 200 h, no cracks |
| Aging Resistance | 150 h, slight colour change, no cracks |
| Chemical Resistance | Stable to building material chemicals |
| Width (m) | Product Code | Thickness (mm) | Area (m²/roll) | Length (m) |
|---|---|---|---|---|
| 1 | FR-06100/ST | 6 | 30 | 30 |
| 1 | FR-10100/ST | 10 | 20 | 20 |
| 1 | FR-13100/ST | 13 | 15 | 15 |
| 1 | FR-15100/ST | 15 | 13 | 13 |
| 1 | FR-20100/ST | 20 | 10 | 10 |
| 1 | FR-25100/ST | 25 | 8 | 8 |
| 1 | FR-30100/ST | 30 | 6 | 6 |
| 1 | FR-35100/ST | 35 | 6 | 6 |
| 1.5 | FR-13150/ST | 13 | 22.5 | 15 |
| 1.5 | FR-15150/ST | 15 | 19.5 | 13 |
| 1.5 | FR-20150/ST | 20 | 15 | 10 |
| 1.5 | FR-25150/ST | 25 | 12 | 8 |
| 1.5 | FR-30150/ST | 30 | 9 | 6 |
| 1.5 | FR-35150/ST | 35 | 9 | 6 |
| 1.5 | FR-40150/ST | 40 | 7.5 | 5 |
| 1.5 | FR-50150/ST | 50 | 6 | 4 |
- Fire retardant NBR PVC formulation meets B1 (GB 8624) for plant rooms and risers.
- 15 mm thickness controls heat gain and surface condensation on chilled water pipework.
- The rubber foam insulation sheet is soft enough to cut with a knife and wrap valves, strainers and flanges.
- Water vapor permeability above 10,000 g/m²·h protects the pipe from corrosion under insulation.
- Density of 45 kg/m³ is stable across the NBR PVC rubber foam insulation sheet, so the wrapped thickness matches the design calculation.
- Batch test reports and datasheets are supplied with every shipment.
- Chiller pipe, valve and fitting wrap
- District cooling and energy station pipework
- Building services riser and plant room insulation
- Condensate and chilled water line protection
- Commercial building HVAC pipework
The NBR PVC compound gives a closed cell, fire retardant sheet that is flexible enough to wrap fittings and stable enough to hold its thermal performance. The 15 mm rubber foam insulation sheet handles condensation control and reaction to fire in one layer.
Cut the sheet with a sharp knife, apply contact adhesive to the pipe and to the sheet, wait until both surfaces are tack free and press firmly. Removable sections can be left unbonded and taped for maintenance access.
The board is tested to B1 (GB 8624) as supplied. The installed system performance also depends on adhesives and finishes, so we recommend compatible adhesives and can advise on the full build up.
Yes. The same NBR PVC rubber foam insulation sheet is available in 20 mm, 25 mm and 32 mm, and a foil faced version can be supplied for outdoor and high humidity service.
Contact Person: Mrs. Betsy Ouyang
Tel: +86 177 4080 0950