Industrial Building Insulation Phenolic Board 75 mm For Wall Roof Envelope
Basic Properties
Trading Properties
| Product Name: | Industrial Building Insulation Phenolic Board | Product Type: | Foil Faced Phenolic Building Board |
|---|---|---|---|
| Core Material: | Rigid Phenolic Foam, Closed Cell, CFC Free | Density: | 40 - 55 Kg/m3 |
| Thermal Conductivity: | <= 0.032 W/(m.K) At 10 C Mean Temperature | Compressive Strength: | >= 0.10 MPa (100 KPa) |
| Dimensional Stability: | <= 2.0% After 7 D At -40 / 70 / 130 C | Oxygen Index: | >= 38% |
| Smoke Density Ratio: | <= 10 | Service Temperature: | -40 To 130 C |
| Thickness: | 75 Mm | Application: | Industrial Building Wall And Roof Envelope Insulation |
| Thermalconductivity: | 0.018-0.025 W/m·K | Materialtype: | Phenolic Resin |
| Applicationareas: | Building Insulation, HVAC, Refrigeration | Usage: | Construction |
| Chemicalresistance: | Resistant To Acids And Alkalis | Type: | Rock Wool |
| Acousticinsulation: | Good Sound Absorption Properties | Closedcellcontent: | >90% |
| Shape: | Sheet | Formfactor: | Panels, Blocks, Or Spray-applied |
| Productname: | Phenolic Foam | Fireresistance: | Class A1 (non-combustible) |
| Thermal Conductivity: | 0.041 W/mK | Design Style: | Modern |
| Compressivestrength: | 0.2-0.5 MPa |
Industrial Building Insulation Phenolic Board 75 mm for Wall Roof Envelope
Industrial buildings combine large spans, high internal temperatures and long service life, and the insulation has to survive all three. This 75 mm phenolic board is specified where a factory, warehouse or process building needs a thin, high performance envelope that will not slump between purlins over twenty years.
The foam is closed cell with 0.032 W/(m.K) conductivity and a service range from minus 40 to 130 degrees. That range covers unheated warehouses in winter and plant rooms above process equipment in summer without dimensional change beyond two percent, so the industrial building insulation layer stays continuous.
Boards are foil faced for vapour control and are fixed to the envelope with mechanical fasteners or bonded into a sandwich panel. Joints are staggered and taped, and penetrations are sealed, because industrial building insulation performance is decided at the details rather than in the middle of the sheet.
Large industrial projects usually take the board in phased deliveries matched to the cladding programme, and each industrial building insulation delivery is checked against the panel schedule on arrival.
Each industrial building insulation package is delivered against the cladding programme, and the industrial building insulation is checked on arrival against the panel schedule. Where a factory runs hot process equipment the industrial building insulation is specified with a foil facing that reflects radiant heat.
Key Advantages
- Service range minus 40 to 130 C suits process and warehouse buildings
- Conductivity 0.032 W/(m.K) keeps envelope thickness down
- Dimensional stability within 2.0% over the full temperature range
- Foil facing provides vapour control and a clean surface
- Rigid board spans between purlins without slumping
- Suits both sandwich panel cores and site applied lining
Technical Specifications
| product name | Industrial Building Insulation Phenolic Board |
| Product Type | Foil faced phenolic building board |
| Core Material | Rigid phenolic foam, closed cell, CFC free |
| Density | 40 - 55 kg/m3 |
| Thermal Conductivity | <= 0.032 W/(m.K) at 10 C mean temperature |
| Compressive Strength | >= 0.10 MPa (100 kPa) |
| Dimensional Stability | <= 2.0% after 7 d at -40 / 70 / 130 C |
| Oxygen Index | >= 38% |
| Smoke Density Ratio | <= 10 |
| Service Temperature | -40 to 130 C |
| Thickness | 75 mm |
| Application | Industrial building wall and roof envelope insulation |
Typical Applications
- Factory and warehouse envelopes
- Process buildings and plant rooms
- Cold storage and food factories
- Logistics and distribution centres
- Workshop wall and roof linings
- Industrial refurbishment projects
Frequently Asked Questions
Q: Can it be used in a sandwich panel?
A: Yes, either as a loose core for your line or as a finished panel from our lamination line.
Q: What fixing is used on site?
A: Mechanical fasteners at the purlin or stud line, with adhesive where the system allows, and joints taped.
Q: How does it perform in a cold store?
A: It is used up to moderate cold store duty, and for deep freeze work a thicker board or a different facing should be assessed.
Q: Do you provide U value calculations?
A: Yes, send wall and roof build ups and we return the calculation with the recommended thickness.
MYREAL produces industrial building phenolic insulation boards on a continuous lamination line in Shanghai and supplies projects in Europe, the Middle East and Southeast Asia. Contact our technical team for datasheets, samples and test reports.
Contact Person: Mrs. Betsy Ouyang
Tel: +86 17740800950
High Thermal Insulation Efficiency Phenolic Panel 80 mm For Roof Wall Application
High thermal insulation efficiency is what allows an...
Lightweight Foil Faced Phenolic Duct Board 30 mm For HVAC Air Duct Lining
Duct work at height punishes heavy materials. This...
Low Smoke Fire Performance Phenolic Board 40 mm For Building Envelope Use
Smoke, not flame, is what stops people leaving a...
Roof Thermal Insulation Phenolic Foam Board 60 mm For Metal Roof Deck Build Up
Roof thermal insulation works in the harshest position on...
