0.6 Percent Water Absorption Stone Look Ceramic Paver 30mm Frost Resistant Exterior Grade Tile

0.6 Percent Water Absorption Stone Look Ceramic Paver for Exterior Paving

In short: The FJ-1104QS is a 30 mm stone look ceramic paver with 0.6% water absorption, frost resistant glaze to GB/T 5486 and Class A1 non-combustible to GB 8624, for plazas, roof terraces and podium decks.

Exterior paving fails at the joints first, and then in the body: water enters a porous tile, freezes, and the face spalls after two or three winters. This stone look ceramic paver is specified at 0.6% water absorption and tested to GB/T 5486 for freeze-thaw with the glaze showing no cracks or flaking.

At 30 mm it also carries foot traffic and light maintenance loads, and the fired-in stone pattern keeps its colour when the surface is scuffed. Because the body is inorganic and Class A1 non-combustible, the same paver can be used on roof terraces and podium decks inside the fire strategy.

Core Advantages

• 0.6% Water Absorption: the closed body leaves little free water to freeze, which is why the paving survives winter cycles
• Freeze-Thaw Tested: glaze without cracks or flaking to GB/T 5486, suitable for cold-climate exterior paving
• Stone Look That Wears: the granite pattern is fired into the body, so scuffing and cleaning do not expose a different colour underneath
• 30 mm Traffic Section: stiff enough for pedestrian plazas and terraces with light maintenance vehicles
• Class A1 Non-Combustible: usable on roof terraces and podium decks inside the building fire strategy
• Pollution Resistance Class 3: city dirt lifts with water, so the paving does not need a sealing cycle

Technical Data

Application

• Plazas, walkways and entrance aprons around public buildings
• Roof terraces and podium decks on residential and office projects
• Pool surrounds and outdoor shower decks
• Shopping centre external paving where a stone look is specified
• Landscape steps, planters and low retaining faces
• Cold-climate exterior paving where porous tile has failed before

Installation & Fixing

Lay on a compacted and drained base: 100–150 mm compacted aggregate, 30–40 mm bedding mortar or a pedestal system on terraces, with a 3–5 mm joint and a flexible exterior grout. Keep a 1–2% fall to drainage and provide movement joints every 6–8 m and at every change of plane. On pedestals use a four-pad support at the panel corners. Send the paving plan and drainage falls and we will return a laying pattern and joint layout.

Packing

Packed face to face in export pallets with PE interlayers and edge guards, about 621 kg gross per crate at 110 × 92 × 200 cm. Store flat on a drained surface and do not stand crates on edge; keep the face protected until the paving is handed over.

FAQ

Send your paving plan, climate zone and slip resistance class, and we will return a laying pattern, samples and quotation within two working days.

Key Facts

Quick Answers