Granite Pattern Sintered Ceramic Ceiling Panel 30mm 7.5kg Per Square Meter Suspended Interior Finish
Basic Properties
Trading Properties
| Product Name: | Granite Pattern Sintered Ceramic Ceiling Panel For Suspended Interior Finishes | Application: | Hotel And Office Lobbies With A Stone Look Carried Onto The Ceiling |
|---|---|---|---|
| HS Code: | 6914100000 | Areal Weight (30 Mm): | About 7.5 Kg/m2 At Nominal 250 Kg/m3 |
| Standard Thickness: | 30 Mm (35, 40 Mm On Request) | Standard Size: | 900 X 600 And 1200 X 600 Mm To Suit Grid |
| Surface Pattern: | Granite Pattern, Honed Face | Suspended System: | Lay-in Or Concealed T-grid, 600 Mm Module |
| Material: | Foamed Ceramic, Perlite Tailings Based Inorganic Body | Maximum Working Temperature: | 1200 DegC |
| Non-combustibility: | Class A1 Non-combustible | Thermal Conductivity (100 DegC): | 0.064 W/(m.K) |
| Heat Storage Coefficient: | 1.5 W/(m2.K) | Volumetric Water Absorption: | 0.6% |
| Density: | 180-330 Kg/m3 | Compressive Strength: | 0.40-2.00 MPa |
| Tensile Strength: | 0.15-0.26 MPa | Flexural Strength: | >=0.60 MPa |
| Freeze-Thaw Resistance: | Glaze Without Cracks And Flaking | Pollution Resistance: | Class 3 |
| Chemical Resistance: | Class GLA | Standard Sizes: | 900 X 600 / 1200 X 600 / 1200 X 900 Mm |
Granite Pattern Sintered Ceramic Ceiling Panel for Suspended Interior Finishes
In short: The FJ-1001P is a 30 mm granite pattern sintered ceramic ceiling panel at about 7.5 kg/m2, Class A1 non-combustible to GB 8624 and 0.6% water absorption, for suspended interior ceilings.
A ceiling carries every panel above people's heads, so weight and fire class decide the system before appearance does. At 30 mm and about 7.5 kg/m², this granite pattern sintered ceramic ceiling panel lets a stone look go overhead without a heavy carrier frame, and it is Class A1 non-combustible on the finished panel.
The fired-in pattern also solves a servicing problem: mineral fibre and gypsum ceilings mark around access hatches and show water stains, whereas the sintered face can be wiped, and a stained panel can be swapped out one at a time because colour is held inside the approved tolerance.
Core Advantages
- About 7.5 kg/m² at 30 mm: light enough for a standard suspended grid, so the carrier frame stays economical
- Class A1 Non-Combustible: suits corridors, lobbies and escape routes where the ceiling is part of the lining
- Wipeable Stone Face: the sintered surface cleans with water, unlike mineral fibre or painted gypsum
- Single-Panel Replacement: colour is held in the body, so one damaged panel can be replaced without re-finishing the ceiling
- 0.6% Water Absorption: resists leak staining and high humidity in lobbies, kitchens and wash areas
- Cut to Standard Grids: 900 × 600 and 1200 × 600 mm modules suit common T-grid and concealed-grid systems
Technical Data
| Property | Value | Standard |
|---|---|---|
| Areal Weight (30 mm) | About 7.5 kg/m² at nominal 250 kg/m³ | Batch weighing |
| Standard Thickness | 30 mm (35, 40 mm on request) | Factory standard |
| Standard Size | 900 × 600 and 1200 × 600 mm to suit grid | Factory tolerance ±1 mm |
| Surface Pattern | Granite pattern, honed face | Sample approval |
| Suspended System | Lay-in or concealed T-grid, 600 mm module | System design |
| Application | Interior suspended ceilings | Project drawing |
| Material | Foamed ceramic, perlite tailings based inorganic body | Batch test report |
| Maximum Working Temperature | 1200°C | Factory standard |
| Non-combustibility | Class A1 non-combustible | GB 8624 |
| Thermal Conductivity (100°C) | 0.064 W/(m·K) | GB/T 10295 |
| Heat Storage Coefficient | 1.5 W/(m²·K) | JG/T 511 |
| Volumetric Water Absorption | 0.6% | Supplied specification |
| Density | 180–330 kg/m³ | GB/T 5486 |
| Compressive Strength | 0.40–2.00 MPa | GB/T 5486 |
| Tensile Strength | 0.15–0.26 MPa | GB/T 5486 |
| Flexural Strength | ≥0.60 MPa | GB/T 5486 |
| Freeze-Thaw Resistance | Glaze without cracks and flaking | GB/T 5486 |
| Pollution Resistance | Class 3 | JG/T 511 |
| Chemical Resistance | Class GLA | JG/T 511 |
| Standard Sizes | 900 × 600 / 1200 × 600 / 1200 × 900 mm | Factory tolerance ±1 mm |
| HS Code | 6914100000 | Customs classification |
Application
- Hotel and office lobbies with a stone look carried onto the ceiling
- Corridor and lift lobby ceilings inside escape routes
- Retail and showroom ceilings with access requirements
- Airport and station concourse soffits
- Restaurant and bar ceilings that need a wipeable finish
- Wet area and washroom ceilings with humidity exposure
Installation & Fixing
Lay into a standard 600 mm T-grid or a concealed grid with retaining clips, and add a safety wire per panel above public areas. Keep a 3–5 mm shadow gap at the perimeter, provide access hatches where services need inspection, and do not point-load the face when lifting panels into the grid. For soffits above 4 m use a panel lifter; send the ceiling plan, grid type and service layout and we will return a panel schedule and fixing detail.
Packing
Packed face to face on export pallets with PE interlayers, about 621 kg gross per crate at 110 × 92 × 200 cm. Store flat, indoors and dry, and do not stack additional weight on the crates.
FAQ
A: They are cut to the module of your grid, normally 900 × 600 or 1200 × 600 mm; send the grid brand and module and we will cut to the measured size with a 1 mm tolerance.
A: Yes for public areas: one stainless safety wire per panel to the structural soffit, in line with normal practice for any rigid ceiling panel above occupied space.
A: MOQ is 2000 m² per order and lead time is 2–3 weeks after deposit and sample approval; phased sites can be shipped in partial lots.
A: Each batch is tested to GB/T 5486, GB 8624 and GB/T 10295, compared with the approved colour sample under daylight, and photographed pallet by pallet before loading.
Send your ceiling plan, grid type and service layout, and we will return a panel schedule, fixing detail and quotation within two working days.
Key Facts
| Property | Value |
|---|---|
| Material | Sintered inorganic ceramic body |
| Thickness | 30 mm (35/40 mm on request) |
| Areal weight | about 7.5 kg/m2 |
| Panel size | 900 x 600 and 1200 x 600 mm to suit grid |
| Fire rating | Class A1 non-combustible, GB 8624 |
| Water absorption | 0.6% |
| Suspended system | lay-in or concealed T-grid, 600 mm module |
| Pollution resistance | Class 3, JG/T 511 |
| HS code | 6914100000 |
| Order terms | MOQ 2000 m2, USD 35-40/m2, 2-3 weeks |
Quick Answers
A: At about 7.5 kg/m2 it lays into a standard 600 mm grid without a reinforced carrier frame.
A: Yes, Class A1 non-combustible to GB 8624, so it can form part of an escape route lining.
A: Yes, colour is held in the body, so one damaged panel can be swapped without re-finishing the ceiling.
A: The sintered face is wipeable and resists water marks, unlike mineral fibre or painted gypsum.
A: MOQ 2000 m2, USD 35-40 per m2, 2-3 weeks after deposit and sample approval.
Contact Person: Mrs. Betsy Ouyang
Tel: +86 177 4080 0950
Curved Granite Look Ceramic Column Cladding 45mm Custom Radius Sintered Panel For Lift Lobby
Curved granite look ceramic column cladding, 45mm, formed...
Retrofit Granite Look Ceramic Cladding 35mm Lightweight Insulating Overclad For Old Building Facade
Retrofit granite look ceramic cladding, 35mm, about 8.8...
Custom Cut Granite Look Ceramic Board Custom Thickness Colour Match Curtain Wall Spandrel Panel
Custom cut granite look ceramic board, cut before firing...
Customized Granite Pattern Ceramic Facade Panel Bespoke Shape Colour Surface Made To Drawing
Customized granite pattern ceramic facade panel produced...
