Heat Resistant Dense Calcium Silicate Shaped Block For 650 c Furnace Lining
Basic Properties
Place of Origin:China
Brand Name:MYREAL
Certification:ISO、SGS、CE
Model Number:CS-S270
Trading Properties
Minimum Order Quantity:1 carton
Standard Packaging:Cartons / PE Bags
Delivery Time:2-3weeks
Payment Terms:T/T
Supply Ability:Subject to order quantity and specifications
Specifications
| Product Type: | Machined Shaped Part | Material: | Hydrous Calcium Silicate From Inorganic Siliceous And Calcareous Materials |
|---|---|---|---|
| Density Grade: | 270 Kg/m3 (MY270) | Dimension: | THK 20-100 Mm, Machined To Customer Drawing |
| Maximum Service Temperature: | 650 C | Thermal Conductivity: | 0.087 W/(m.K) At 300 C |
| Compressive Strength: | >= 0.40 MPa (MY150/170) / >= 0.65 MPa (MY220/240/270) | Flexural Strength: | >= 0.20 MPa (MY150/170) / >= 0.33 MPa (MY220/240/270) |
| Dimensional Stability: | <= 1% | Linear Shrinkage: | <= 2% |
| Moisture Content: | <= 7.5% | Fire Performance: | GB/T 8624 Class A1 Non-combustible |
| Chloride Ion: | Super Low, Suitable For Stainless Steel Pipework | Application: | Furnace Door, Burner Opening And Penetration Lining |
| Moistureresistance: | Good | Applications: | Construction, Insulation Boards, Refractory Materials |
| Appearance: | White Powder Or Granular | Density: | 2.2 - 2.6 G/cm³ |
| Fireresistance: | Excellent | Phvalue: | Alkaline (around 11-12) |
| Waterabsorption: | Low | Chemicalformula: | Ca2SiO4 |
| Compressivestrength: | High | Insulationproperty: | Good Thermal Insulation |
| Meltingpoint: | 1540 °C | Stability: | Chemically Stable Under Normal Conditions |
| Thermalconductivity: | 0.06 - 0.10 W/m·K | Productname: | Calcium Silicate |
| Toxicity: | Non-toxic |
Product Description
MYREAL calcium silicate shaped blocks are machined from MY270 dense board, which carries 0.65 MPa compressive strength and 0.33 MPa flexural strength with dimensional stability within 1%. They are made to your drawing for furnace doors, burner openings, pipe penetrations and irregular equipment surfaces where a flat board cannot follow the furnace geometry, and hold their shape at 650 C service.
Grade
MY270
Compressive
0.65 MPa
Form
Shaped Part
Max Temp
650 C
Technical Data
Application
Specified where the lining has to follow a shape that flat board cannot cover, and where the part must resist knocks during erection and service.
- Furnace door and burner opening blocks
- Pipe and duct penetration pieces
- Irregular shell and casing lining segments
- Support and spacer blocks in furnace lining
- Replacement parts for worn lining on existing furnaces
Key Advantages
- Machined to your drawing, so complex geometry needs no on site cutting.
- MY270 grade gives 0.65 MPa compressive and 0.33 MPa flexural strength.
- Dimensional stability within 1% holds the fit through thermal cycling.
- Class A1 non-combustible with no flame spread and no dense smoke.
- Low chloride ion content, safe for stainless steel adjacent parts.
Standards and Compliance
- Manufactured to GB/T 5486 calcium silicate products standard under an ISO 9001 certified quality system
- GB/T 8624 Class A1 non-combustible, no flame spread and no dense smoke
- Low chloride ion content protects stainless steel and alloy pipework from chloride stress corrosion
- Low water absorption, performance is not affected by humidity
- Free of formaldehyde, benzene and other harmful substances
Installation Notes
- Dry fit the block against the shell before fixing to confirm the shape.
- Keep the designed expansion gap between adjacent blocks.
- Fix with stainless steel anchors or ceramic studs matched to the block thickness.
- Seal joints with a matching high temperature mortar where a continuous lining is required.
- Do not cut or drill on site beyond the drawing allowance.
FAQ
Q: Can you machine the block to our drawing?
A: Yes. Shaped parts are machined from MY270 board to your drawing, including curves, steps and cut outs. Send a drawing with dimensions and we will confirm the block layout.
Q: What thickness can a shaped block have?
A: From 20 mm to 100 mm, taken from the MY270 board stock range. Thicker sections are built up from layers and fixed together.
Q: Why use a shaped block instead of flat board?
A: A flat board leaves gaps at curves, openings and penetrations, and those gaps become hot spots. A machined block fills the geometry exactly and keeps the lining continuous.
Q: Does the shaped block resist load?
A: Yes. MY270 carries 0.65 MPa compressive strength, so it can be used for support blocks and spacers as well as pure insulation.
Send your drawing - get a calcium silicate shaped part quotation
MYREAL Energy Saving (Shanghai) Co., Ltd. | office@myreal.cn | www.myreal.cn | +86 21 64431102
Contact Details
Myreal Energy Saving (Shanghai) Co., Ltd.
Contact Person: Mrs. Betsy Ouyang
Tel: +86 17740800950
Related Products
Dimensionally Stable Calcium Silicate Pipe Section For Steam Line Insulation
Pre-formed calcium silicate pipe sections MY170 / MY220...
Removable Calcium Silicate Insulation Cover For Valve Flange Maintenance Access
Removable calcium silicate insulation covers, made as a...
Dense MY270 Calcium Silicate Insulation Board For Industrial Furnace Lining
Dense calcium silicate board MY270 at up to 270 kg/m3 and...
Low Chloride Rigid Calcium Silicate Pipe Section For High Temperature Steam Line Insulation
Pre-formed calcium silicate pipe sections for high...
